Ham Radio - Radioamateur - Domotique
Application to Raspberry Pi 4 Micro-SD cards are very convenient in size and cost for Raspberry Pi-based systems. In the long term, for high-demand applications, using an SSD offers better reliability, reduced access times...
Here is the detailed procedure to install Remote SDR in version 5, on a Raspberry Pi 4B with at least 2 GB of memory or an Orange Pi Zero 2. The latest images written...
GNU RADIO 3.9 – Osmocom – Soapy SDR RTL-SDR – HackRF – Adalm-Pluto – RSP1 – RSP1A – SA818 Below is the detailed procedure for installing Remote SDR in version 5 on a Raspberry...
Web based Transceiver “Remote SDR” is a web application allowing to remotely control an amateur radio transceiver between 1 MHz and 6 GHZ. Its first application was the duplex control of a station allowing...
Behind this barbaric title, you will find below an example of a web server under linux with Node JS which allows: access in http: port 80 access in https: port 443 an express-based web...
Web based transceiver developped by F1ATB Below is the connection diagram of the various modules making up the transceiver allowing links to QO-100 with the “Remote SDR” application. I have been using this system...
With a system (Remote SDR) running remotely 24 hours a day, we are not immune to a system crash and especially a loss of remote control. To remedy this, it is possible to set...
For those who would like to open ports to communicate with the outside world, since version 5 of Remote SDR, all communications (audio, video, parameters) are done in https on port 443. This is...
It is possible to set the GPIO outputs according to the reception or transmission frequency. This is applicable for configurations with one or two orange PIs. This makes it possible to switch relays, for...
With intense use, the CPU may heat up, especially if it is mounted without a heat sink. If 65 ° C is exceeded,one GPIO pin goes to 1 to control the power on of...
COMPACT CONFIGURATION with an ADALM-PLUTO – Rasperry Pi 4 – ETHERNET Avantages Disadvantages – Well-known RPI4 – Wifi or Ethernet– 12 bits of Pluto dynamic – poor stability in frequency of the Adalm-Pluto May...
Characteristics Receiver SDR in reception: RTL-SDR (example: NESDR SMArt from Nooelec) or, HackRF One or, Adalm-Pluto RSP1, RSP1A MSI SDR Frequency: 1 MHz to 6 GHz (depending on the chosen SDR) Spectral band processed:...
Web based Transceiver “Remote SDR” or “SDR Distant” is a web application allowing to remotely control an amateur radio transceiver between 1 MHz and 6 GHZ. Its first application was the duplex control of...
Web based Transceiver “Remote SDR” or “SDR Distant” is a web application allowing to remotely control an amateur radio transceiver between 1 MHz and 6 GHZ. Its first application was the duplex control of...
Remote SDR source code and images available on Github Here is the detailed procedure to install Remote SDR version 4 on a Raspberry Pi 4B with at least 2 GB of memory or an...
Below is the detailed procedure to install Remote SDR version 4 on a Raspberry Pi 4 B (2GB) or an Orange Pi Zero 2. It is adaptable for other ‘Single Board Computer’ cards if...
Obsolete. Go here Remote SDR version 2.5 available on Github Here is the detailed procedure to install Remote SDR version 2 on a Raspberry Pi 4B with at least 2 GB of memory. The...
Below is the detailed procedure to install Remote SDR version 2 on a Raspberry Pi 4 B (2GB), an Orange Pi One Plus or an Orange Pi Zero 2. It is adaptable for other...
The first step consists of installing GNU Radio and the interface to Adalm-Pluto or PlutoSDR on an Orange Pi One Plus running under Armbian. Then as an example, we will study the realization of...
Recent Comments